G-1 B5040 Bunker Baler
Agrotec
G-1 B5040 Bunker Baler
G-1 B5040 BUNKER BALER
Mobile baler-wrapper combination with fully automatic program control
The Bunker Baler G-1 B5040 is used to compress and package freshly cut hemp plants into a round bale (bale diameter: 1.25 m / 4’ x 4’) directly on the field. Inspired by our G-1 F125 Kombi, this baler-wrapper combination has been designed specifically for baling industrial hemp. The difference between the two machines lies in the feeding of the bale chamber. While the G-1 F125 Kombi uses a pickup to gather material directly from the ground, the Bunker Baler is filled from the top by means of a conveyor system.
Work flow - hemp harvest
Generally, there are a variety of hemp harvesting methods. The following is a description of the harvesting technique where the entire work flow is completed in one sequence directly on the field. For harvesting hemp with a conventional forage chopper, the ideally suited machines are the LT-Master and VARIO-Master baler-wrapper combinations.
Mowıng hemp
The hemp plant is cut below the leaves and buds by a specially designed mower and then transported into the bunker of the G-1 B5040 Bunker Baler via an integrated conveyor belt.
Hemp baling
The cut plants are fed gradually to the bale chamber from the bunker via the conveyor system. The material is then highly compressed inside the bale chamber.
Hemp bale wrapping
Immediately after the baling process, the round bale is transferred to the wrapping table and packaged perfectly air-tight.
Bale deposit
The fully wrapped bale of industrial hemp is deposited directly onto the field.
Galery