Agrotec Machine - Göweil Baling and Wrapping Technology

TR | EN |

G4020 Q Profi

Agrotec

G4020 Q Profi

G4020 Q PROFI | SQUARE BALE WRAPPER

This trailed machine G4020 Q Profi with twin wrapping arm and bale pick-up is the machine that delivers the highest possible professional performance of any square bale wrapper. Thanks to the PROFI program control, the execution of all cycles is fully automatic. This makes working with the machine as comfortable as can be.

G4020 Q Profi
G4020 Q Profi
G4020 Q Profi
G4020 Q Profi
G4020 Q Profi
G4020 Q Profi

Twin wrapping arm

Hydraulically tilting wrapping table with mechanical belt length adjustment

Wide, continuous belt with belt guide and 4 bale guide rollers

Bale pick-up for square and round bales

Bale pick-up on the right hand side with the direction of travel

Bale deposit to the left with the direction of travel

Combined film stretching unit 500 mm and 750 mm (20” and 30”)

Automatic film cutting and holding system

Hydraulically adjustable lift axle

Lower linkage link drawbar

Storage for up to 16 rolls of film

Tires 380/55-17AW

Light and indicator system

2 LED work lights

Load-Sensing

Can also be operated in conjunction with tractors without load sensing pump

Feed rate shut-off valve

This ensures that the film will overlap accurately for rectangular bales

Fully automatic program control PROFI

The execution of all work cycles is fully automatic

Technical data (basic model)

Weight: 3,680 kg (8,100 lbs)
Length: 6,410 mm (21’)
Width: 2,410 mm (8’)
Height: 3,710 mm (12’ 2”) (with the lift axle extended)
For all bale dimensions:

from 0.80 x 0.80 m to 1.20 x 1.40 m (32” x 32” to 48” x 56”)
Single/double bales:

with a length of up to 2.00 m (78”)
Round bale diameter: 0.90 - 1.60 m (36” - 63”)
Oil requirements:

starting at 80 l/min at max. 190 bar
Bale weight round / square: max. 1,800 / 1,500 kg (max. 4,000 / 3,300 lbs)

Required connections

1 pressure connection and 1 depressurized return for the supply of the wrapper

Load Sensing connection (for LS mode)

3-pin power outlet for the electrical supply including direct supply line to the battery (cable cross-section 2x6 mm²)

7-pin power outlet for the entire lighting system (excluding work lights)

Radio remote control

Cardan shaft

Axle suspension

Dual-line air brake system

Dual-line hydraulic brake system - with emergency brake valve and accumulator

Hydraulic brake without accumulator and breakaway quick-closing device

Battery supply cable 5.3 meters (17 ft) 2x6 mm² with 3-pin power outlet

Tires 520/50-R17 FLT

Width altered to 2,545 mm (8’ 4”), height altered to 3,770 mm (12’ 4”)

Hydraulic support foot

Height-adjustable drawbar with hydraulic support foot for wheel loader operation. Can be controlled via radio remote control

Film monitoring unit with single-film mode:

Stops the wrapping process if film tears or runs out.
Automatically switches to “single-film mode” as soon as one roll runs out. During this process the feed rate is reduced to ensure an overlap of 50 %.

PTO drive shaft (without hydraulic oil)

Including gearbox with pump, return filter and 30 L hydraulic oil tank

3-cylinder diesel engine Kubota (without hydraulic oil)

Water-cooled, 3-cylinder engine, 17.5 kW, including battery, generator, hours counter and electric starter as well as hydraulic system fully assembled

Diesel engine speed control

Switches automatically to idle speed after the wrapping process or extended intervals. Only in combination with 3-cylinder diesel engine Kubota

Drawbar eye types

Customers can choose from a large selection of drawbar eye types

Galery

G4020 Q Profi
G4020 Q Profi
G4020 Q Profi
G4020 Q Profi
G4020 Q Profi
G4020 Q Profi

Cookies are used on this site to improve the user experience and to ensure the efficient operation o

OK